Blog - Medical School Lectures

Jim Green Jim Green

0 Course Enrolled • 0 Course Completed

Biography

RUCKUS RCNI German - RCNI Deutsche

Wenn Sie die Fragen und Antworten zur RUCKUS RCNI Zertifizierungsprüfung kaufen, können Sie nicht nur die RUCKUS RCNI Zertifizierungsprüfung erfolgreich bestehen, sonder einen einjährigen kostenlosen Update-Service genießen. Falls Sie in der Prüfung durchfallen, zahlen wir Ihnen die gesammte Summe zurück. Sie können im Internet teilweise die Fragen und Antworten zur RUCKUS RCNI Zertifizierungsprüfung kostenlos als Probe herunterladen, um die Zuverlässigkeit unserer Produkte zu prüfen.

Wir versprechen Ihnen nicht nur eine 100%-Pass-Garantie, sondern bieten Ihnen einen einjährigen kostenlosen Update-Service. Wenn Sie unvorsichtigerweise die RUCKUS RCNI Prüfung nicht bestehen, erstatten wir Ihnen die gesammte Summe zurück. Aber das ist doch niemals passiert. Wir garantieren, dass Sie die RUCKUS RCNI Prüfung 100% bestehen können. Sie können teilweise im Internet die RUCKUS RCNI Prüfungsfragen und Antworten von ZertFragen als Probe umsonst herunterladen.

>> RUCKUS RCNI German <<

RCNI PrüfungGuide, RUCKUS RCNI Zertifikat - RUCKUS Certified Networking Implementer

Damit die Kandidaten bessere Noten bei der RUCKUS RCNI Zertifizierungsprüfung bekommen können, versuchen wir ZertFragen immer, unser Bestes zu tun. Nach mehrjährigen Bemühungen beträgt die Hit-Rate der RUCKUS RCNI Zertifizierungsprüfung von ZertFragen schon 100%. Wenn die Fragenkataloge zur RUCKUS RCNI Zertifizierungsprüfung irgend ein Qualitätsproblem haben oder Sie die Zertifizierungsprüfung nicht bestehen, erstatten wir alle Ihren bezahlten Summe zurück.

RUCKUS RCNI Prüfungsplan:

Thema
Einzelheiten

Thema 1

ICX Solution Troubleshooting: RUCKUS ICX networking Engineers are expected to demonstrate troubleshooting skills in this section. It covers basic networking troubleshooting techniques and procedures for performing ICX switch recovery. Candidates should be able to identify and resolve common network issues in ICX environments.

Thema 2

Foundational Networking Concepts: This section of the exam measures the skills of RUCKUS ICX Network Administrators and covers essential networking concepts. It includes VLAN design and configuration, STP and loop prevention protocols, PoE requirements, basic LAN concepts, Layer 3 routing configurations, and basic QoS concepts. Candidates should be able to demonstrate proficiency in designing VLANs for network segmentation.

Thema 3

ICX Solution Implementation: This significant portion of the exam assesses the skills of RUCKUS ICX Network Administrators in implementing ICX solutions. It covers ICX software management, stacking capabilities, PoE configuration, Layer 2
3 protocols, and ICX services, IPv4
IPv6 addressing on switch interfaces, ICX switch management methods, and configuring multicast and security features. Candidates should be able to demonstrate proficiency in configuring stacking for scalable network deployments.

Thema 4

RUCKUS Products & Solutions: RUCKUS ICX networking Engineers are expected to showcase their knowledge of RUCKUS products and solutions in this section. It focuses primarily on the ICX product line, covering various switch models and their capabilities. Candidates should be familiar with the features, specifications, and use cases of different ICX switches.

RUCKUS Certified Networking Implementer RCNI Prüfungsfragen mit Lösungen (Q35-Q40):

35. Frage
In a core/edge network topology, which ports should have Root Guard enabled?

A. route-only ports facing the WAN
B. core ports facing the edge
C. edge ports facing the core
D. management ports at the core

Antwort: B

36. Frage
Which command enables global IPv6 capabilities?

A. ipv6 multicast
B. ipv6 nd proxy
C. ipv6 dhcp6-server enable
D. ipv6 unicast-routing

Antwort: D

Begründung:
To enable IPv6 functionality on a RUCKUS ICX switch, you must activate IPv6 unicast routing globally.
This allows the switch to forward IPv6 packets and participate in IPv6 routing.
Steps to Enable IPv6 Unicast Routing:
* Access the Switch's Command-Line Interface (CLI):
* Connect to the switch via console, SSH, or Telnet.
* Enter privileged EXEC mode:
plaintext
Copy code
enable
* Enter Global Configuration Mode:
* Switch to global configuration mode:
plaintext
Copy code
configure terminal
* Enable IPv6 Unicast Routing:
* Activate IPv6 unicast routing:
ipv6 unicast-routing
* Configure IPv6 Addresses on Interfaces (Optional):
* Assign IPv6 addresses to the desired interfaces:
interface ethernet 1/1/1
ipv6 address 2001:db8::1/64
* Verify the Configuration:
* Exit to privileged EXEC mode and display the running configuration to confirm:
end
show running-config
References:
* For detailed information on configuring IPv6 addresses, refer to the RUCKUS FastIron Layer 3 Routing Configuration Guide: Configuring a global or site-local IPv6 address with a manually configured interface ID By following these steps, you enable the switch to handle IPv6 traffic, facilitating IPv6 communication within your network.

37. Frage
By default, how often are VRRP-E hello messages sent from the master?

A. every 1 second
B. every 60 seconds
C. every 5 seconds
D. every 3 seconds

Antwort: A

38. Frage
When a high CPU alert about an ICX switch is triggered, which command will provide more detail on the processes taking up CPU cycles?

A. show cpu histogram
B. show cpu tasks
C. show cpu
D. show process

Antwort: B

39. Frage
Which device will become the root in the Spanning Tree election process?

A. the device with the highest IP address
B. the device with the highest bridge priority value
C. the device with root guard enabled
D. the device with the lowest bridge ID

Antwort: D

Begründung:
In the Spanning Tree Protocol (STP), the root bridge is the central reference point for all spanning tree calculations. The election of the root bridge is determined by the bridge ID (BID), which comprises two components:
* Bridge Priority:
* A configurable value ranging from 0 to 65,535, in increments of 4,096. The default priority is typically 32,768.
* MAC Address:
* The unique hardware address of the switch.
Root Bridge Election Process:
* Lowest Bridge ID Selection:
* STP elects the switch with the lowest bridge ID as the root bridge. The bridge ID is determined by combining the bridge priority and the MAC address.
* Priority Comparison:
* Switches first compare the bridge priority values. The switch with the lowest priority value is favored.
* MAC Address Comparison:
* If multiple switches share the same priority value, the switch with the lowest MAC address becomes the root bridge.
Example:
* Switch A:
* Priority: 32,768
* MAC Address: 00:1A:2B:3C:4D:5E
* Switch B:
* Priority: 32,768
* MAC Address: 00:1A:2B:3C:4D:5F
In this scenario, both switches have the same priority. Therefore, STP compares the MAC addresses, and Switch A, with the lower MAC address, is elected as the root bridge.
Key Points:
* Enabling root guard on a device does not influence its election as the root bridge; instead, it prevents designated ports from becoming root ports.
* The device with the lowest bridge ID (combination of priority and MAC address) is elected as the root bridge.
* A lower bridge priority value increases the likelihood of a switch becoming the root bridge.
References:
* Root Bridge Election in Spanning Tree Protocol
* Spanning Tree Protocol - Part 3: Bridge ID, Priority, System ID
Sources

40. Frage
......

Es existiert viele Methoden, mit der Sie sich auf die RUCKUS RCNI Zertifizierungsprüfung vorzubereiten. Unsere Website bietet zuverlässige Prüfungsmaterialien, mit den Sie sich auf die nächste RUCKUS RCNI Zertifizierungsprüfung vorbereiten. Die Lernmaterialien zur RUCKUS RCNI Zertifizierungsprüfung von ZertFragen enthalten sowohl Fragen als auch Antworten. Unsere Materialien sind von der Praxis überprüfte Software. Wir werden alle Ihren Bedürfnisse zurRUCKUS RCNI Zertifizierung abdecken.

RCNI Deutsche: https://www.zertfragen.com/RCNI_prufung.html

Jim Green Jim Green

Biography

Our Lecturer

Our Links

Main Menu

Ashiqullah Khan